Home
:
Technology
:
Case Studies
Around the world, all Pneumofore solutions have one thing in common: every one is a success story. Our focus on the uncompromised quality and efficiency of our products is reflected in every installation.
Pneumofore systems increasingly serve to solve challenges where other technologies not only underperform but simply fail. Beyond meeting specific application requirements succesfully, they also present a range of other benefits reflected in an overall reduced Life Cycle Cost: air cooling instead of water cooling leads, higher power efficiency, lower costs for spares and maintenance, lower oil mist emissions and noise - advantages gained in nearly every applications.
| Drying / Degassing | Food | Others | ||
To commission natural gas pipelines in Russia, Gazprom used UV50 pumps on a trailer |
Vacuum system for Caillor, the largest producer of quail in Europe |
A fixed monthly rental fee to avoid unexpected service costs |
||
At Brakes India, the drying process was improved by installing a UV vacuum pump |
Benefits of UV pumps replacing liquid ring machines |
A concise look to installations in a wide range of industries and their results |
||
A 1.386 km long project from East to West India |
Italian pasta factories place pumps before walls... |
UV vacuum pumps for the pharmaceutical industry |
||
The drying cycle time was reduced from 32 to 10 hours and the utility cost was cut by 50% |
Increased productivity and other benefits in food packaging with double-stage vacuum system |
Centralized vacuum solution with less kW, less noise and better vacuum |
||
Vacuum use for degassing of bricks and tiles |
Specially designed vacuum pump reduces contamination and lowers Life Cycle Costs |
State-of-the-art vacuum pumps for a German semicon application |
||
Higher vacuum levels and lower operating costs with double-stage vacuum system |
Glass | Some technicians refuse the choice of cheap equipment to satisfy their purchasing offices |
||
New vacuum system improves the styropor production process |
First in 2003, Sevam glassworks in Morocco installed UV pumps. Now again in 2010 |
Double-stage system for electrical motors and transformers |
||
| Cans | Units operating 24/7 and efficient performance for decades |
Creating Atm. pressure of 33.000 ft altitude for monitoring impact on passenger health |
||
Air cooled rotary vane technology replaces screw and liquid ring vacuum pumps |
Air cooled vacuum system also for the traditional Yenishir plant |
Compressors | ||
It took 9 years of continuous work before overhauling |
The largest vacuum installation by Pneumofore for a single glasswork |
Rotary vane replacing screw in Polish underground mines |
||
Improved production speed in tinplate cans fabrication |
The importance of appropriate product’s choice |
An air compressor F120, running round-the-clock since 1953 |
||
Centralized air cooled vacuum system for the production of aluminium cans |
State-of-the-art system for glass industry leader |
|||
Air cooled vacuum system for IS machines in Malaysia |
||||
New vacuum system at Middle East Glass – Egypt |
||||
When the fundamental question of an installation’s Life Cycle Cost is considered, Pneumofore maintains a firm, leading position |