Sections

Compressors in Mines

Home : Case Studies : Compressors in Mines
Select an alternate language version:

Rotary vane air compressors in polish underground mines

Compressors in Salt Mine, Klodava

A special of compressors was designed for the use in explosive areas. The rotary vane air ends allow lower temperatures, thus minor risk of fire caused by heat. Besides ATEX certification, the units were moved easily in elevators and tunnels of coal and salt mines to their installation location 700 m below ground level.


The rare presence of explosive gasses in underground mines is probably the cause of uncommon but extremely dangerous accidents. The precise reasons for explosions in mines, usually the cause of death of dozens of workers, is unclear. The compressors installed underground surely represent a danger due to their dissipated heat, moving parts and difficult accessibility for frequent service. Without mentioning the specific tragic events that moved Polish air compressor specialists to start the collaboration with Pneumofore, we can report now about the 7 years of continuous operation of our 20 rotary vane air compressors.

Compressors in Salt Mine - AS75/V

700 m below, running since 2002 @ 5,2 bar(g)

First, the compressors must fit on the narrow trains running in the 350 km of underground tunnels, at 700 m below ground level. The elevator is used to move on the different levels and the shape of the shaft is the first limitation for dimensions of transported goods. The standard compressor size is 75 kW unit running at 6 bar(g).
 
The previously used screw compressors were tailored made to satisfy the dimensional limitation, but showed excessive risk of explosion due to high temperatures caused by high speed of rotation and many moving parts. The temperature in a Pneumofore vane compressor with intensive oil injection reaches max. 125° C were the screw runs at 200° C. The 2 bearings of the vane air end with direct coupling replace the screw elements with gear box and the total of 10 bearings. Also the noise was reduced, when moving from screw to vane.
 
The electrical components, starting from electrical motors, all wires and the control/power panel itself must be ATEX certified. The presence of sparks, the ignition of explosions, represents the highest danger. Electrical connections are immersed in wax to avoid any spark. But also metals with high temperature can be the cause for fire, thus the air cooling must be dimensioned generously, as the air temperature in the tunnel is about 24° C with a 30% RH value.
 
The compressed air pipes are of DN300 and 50 km long. Pressure and capacity losses must be considered, also because of the difficult inspection for leaks in the poor light and uneasy environment with forced ventilation. The pressure losses were reduced by having the compressors near the spot of need, thus they can run continuously at 5,2 bar.
 
A considerable engineering work was done back in 2001 to design the AS75/V air compressor for underground mines. Today with units operating in Klodawa, Sobiesky, Pilsudsky, Ziemowit and Piast, Pneumofore can refer to precious references. The trouble-free operation results also from the intensive service executed by our local partners. Regular ordinary maintenance is important, as the accessibility for repair is restricted, reason why for this continuous operation the sturdy and reliable Pneumofore rotary vane air ends were installed.

December 2009

SEE ALSO
  • 459.000 hours of operation
    Round-the-clock operation since 1953, the story of an F120 compressor continues
  • Air Compressors
    When the air end is the most durable part of a compressor, it is a Pneumofore machine
MORE CASE STUDIES
COMPRESSED AIR VACUUM
PLANT AIR
Industrial Compressed Air at low or high pressure for Steel, Mining, Glass & Other Applications
BEVERAGE CANS
Steel, Mining, Glass & More
HOLLOW GLASS
Bottling, Forming, Central Systems, Water Savings
FOOD
Processing/packaging, Pasta, Beer, Meat & More
DRYING/DEGASSING
Pipelines, Tiles, EPS
OTHER
Semiconductors, Flight Simulation, Rentals, Thermoforming, Pharma/Medical & More
ROTARY VANE BY PNEUMOFORE

simple, reliable & durable

Direct coupling means few moving parts, low rotation speed, low temperature. This virtually eliminates repairs and ensure superior reliability and longevity.

high energy savings

Air cooling through vertical layout, direct coupling, and intensive oil injection can result in up to 70% less power usage than other systems.

designed for extremes

Tested and proven for high performance in desert and tropical climates and available for special requirements like explosive gas or food safety.

low cost of operation

Low maintenance, negligible repairs, high energy savings and high reliability (no production downtime) make this the least costly long-term option available today.

easy to install and run

Ready-to-use turnkey system with optional Variable Speed drive. No foundation or water needed. Compact footprint with heat recovery. ISO 9001 and ISO 14001 certified.

first class support

Each unit comes with integration engineering and a 5-years warranty. Extraordinary and regular service by Pneumofore certified professionals is available worldwide.
LEARN MORE ABOUT ROTARY VANE TECHNOLOGY
FIND A CASE STUDY FOR YOUR APPLICATION
CONTACT PNEUMOFORE FOR YOUR SPECIFIC NEEDS
SWISS ENGINEERING
ITALIAN DESIGN
GLOBAL PRESENCE